Laminar Air Flow -Microprocessor Controlled

Laminar Air Flow -Microprocessor Controlled

Technical Specification

  • Switches Microprocessor based switches for blower, 
    Flourscent light & UV light with LCD back light display.
    (UV light with Timer).
  • Pre –filter 99.00% down to 5micron.
  • HEPA Filter ISO 14644 Class 5 (Class 100) 99.97%-99.99%.
  • Down to 0.3 micron. Mesh guard for protection of HEPA filter.
  • Airflow Frontward Horizontally.
  • Noise Level 60 decibel ± 5%.
  • Velocity 0.35-0.50m/sec.
  • Work Table Made up of Stainless Steel 304gr.
  • Cock for gas on work table.
  • Side Panels 6mm ± .5mm thick acrylic sheet.
  • Front door made of acrylic.
  • UV Lamp 15/30W, make Philips Holland.
  • Illumination 20/40W, Flourescent tube with diffuser.
  • Pressure Digital Manometer-0-50mm range with sunmica
  • from outside and epoxy painted from inside.
  • Power Supply 230V ± 10V/50Hz single phase A.C.
  • Cabinet 19mm thick Duraboard coverd with sunmica from outside and epoxy painted from inside.
  • Heavy Duty Blower Dynamically balanced with 0.25HP Electric motor mounted on anti vibration pad 1440rpm motor.


Size 60x60x60cm

Size 90x60x60cm

Size 120x60x60cm

Size 180x60x60cm